Appendix I: Additional SRC Information
661
To set or
enable
Use this command
EAP outer
authentication
network ethernet <ETH>
eapOuterAuthentication
<outer_auth>
<outer_auth> =
PEAP or TLS
EAP inner
authentication
network ethernet <ETH>
eapInnerAuthentication
<inner_auth>
<inner_auth> =
MSCHAPv2 or TLS
EAP identity
network ethernet <ETH>
eapIdentity <identity>
<identity> = your user name for EAP
authentication
EAP TLS client
certificate
network ethernet <ETH>
eapClientCertificate
When prompted to enter the client
certificate, open the certificate with a
text editor, copy and paste the content
into the communications program.
EAP TLS client
private key
network ethernet <ETH>
eapClientPrivateKey
When prompted to enter the private
key, open the key with a text editor,
copy and paste the content into the
communications program.
EAP password
network ethernet <ETH>
eapPassword
When prompted to enter the password
for EAP authentication, type the
password.
Summary of Contents for Raritan SRC-0100
