LEGRAND Raritan SRC-0100 User Manual Download

Page: 354 / 698

Chapter 6: Using the Web Interface

342

To reset the device to factory defaults:

Choose Maintenance > Unit Reset >

Type your password and then click Factory Reset to reset the SRC to
factory defaults.

A message appears, with a countdown timer showing the remaining
time of the operation. It takes about two minutes to complete.

When the reset is complete, the login page opens.

Tip: If you are not redirected to the login page after the reset is complete,
click the text "this link" in the countdown message.

Alternative:

There are two more methods to reset the device to factory defaults.



Use the "mechanical" reset button



Perform the CLI command

For details, see

Resetting to Factory Defaults

(on page 583).

Retrieving Software Packages Information

You can check the current firmware version and the information of all
open source packages embedded in the SRC through the web interface.

To retrieve the embedded software packages information:

Choose Maintenance > About SRC. A list of open source packages is
displayed.

You can click any link to access related information or download any
software package.

Summary of Contents for Raritan SRC-0100


























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Raritan SRC-0100

Reviews:

Related manuals for Raritan SRC-0100

Brands by name

Popular brands

LEGRAND Raritan SRC-0100, User Manual

Search results

Summary of Contents for Raritan SRC-0100

Reviews:

Related manuals for Raritan SRC-0100

Brands by name

Popular brands