Chapter 6: Using the Web Interface
287
To delete it, click
on the top-right corner. Then
click Delete on the confirmation message.
Sample Event Rules
Sample Device-Level Event Rule
In this example, we want the SRC to record in the internal log when the
network link is up to down. The sample event rule looks like this:
Event: Device > Network interface link state is up
Trigger condition: Both
Actions: System Event Log Action
To create the above event rule:
1.
In the Event field, select Device as we are specifying an event
regarding the SRC device.
2.
Then select "Network interface link state is up" because we want the
SRC to respond to the event related to physical connections and/or
disconnections from the network.
3.
Select the Both radio button since we want both connection and
disconnection actions to be recorded when either action is taken.
4.
Select "System Event Log Action" as we intend to record this event in
the internal log when the specified events occur.
Summary of Contents for Raritan SRC-0100
