LEGRAND Raritan SRC-0100, User Manual

Page: 343 / 698

Chapter 6: Using the Web Interface
331
Bulk Configuration
The Bulk Configuration feature lets you save generic settings of a
configured SRC device to your computer. You can use this configuration
file to copy common settings to other SRC devices of the same model
and firmware version.
A source device is the SRC device where the configuration file is
downloaded/saved. A target device is the SRC device that loads the
configuration file.
By default the configuration file downloaded from the source device
contains settings based on the built-in bulk profile. The built-in bulk
profile defines that all settings should be saved except for
device-specific settings.
You can decide which settings are downloaded and which are not by
creating your own bulk configuration profile.
Note that "device-specific" settings, such as the device's IP address or
environmental sensor settings, will never be included into any profile you
will create so they will never be downloaded from any source device. See
Device-Specific Settings (on page 665).
When the date and time settings are included in the bulk configuration
file, exercise caution when distributing that file to target devices located
in a different time zone than the source device.
Tip: To back up or restore "all" settings, including device-specific ones,
use the Backup/Restore feature instead. See
Backup and Restore of
Device Settings (on page 335).
Main bulk configuration procedure:
1. If you prefer customizing the bulk configuration file, create your own
bulk configuration profile(s) first. See
Customizing Bulk
Configuration Profiles
(on page 331).
2. Perform the bulk configuration operation, which includes the
following steps. For details, see
Performing Bulk Configuration
(on
page 333).
a. Make sure the desired bulk configuration profile has been
selected on the source device.
b. Save a bulk configuration file from the source device.
c. Perform bulk configuration on one or multiple target devices.