Chapter 6: Using the Web Interface
247
Event/context
Default message when the event =
TRUE
Default message when the event
= FALSE
Device > A Radius error
occurred
A Radius error occurred:
[ERRORDESC].
Device > Raw configuration
downloaded
Raw configuration downloaded by user
'[USERNAME]' from host '[USERIP]'.
Device > Raw configuration
updated
Raw configuration updated by user
'[USERNAME]' from host '[USERIP]'.
Device > Unknown peripheral
device attached
An unknown peripheral device with
rom code '[ROMCODE]' was attached
at position '[PERIPHDEVPOSITION]'.
Device > Slave connected
Slave connected. Slave
disconnected.
Device > WLAN authentication
over TLS with incorrect system
clock
Established connection to wireless
network '[SSID]' via Access Point with
BSSID '[BSSID]' using '[AUTHPROTO]'
authentication with incorrrect system
clock.
Device > Features > Schroff LHX
/ SHX Support
Schroff LHX / SHX support enabled.
Schroff LHX / SHX support disabled.
Peripheral Device Slot > * >
Numeric Sensor > Unavailable
Peripheral device
'[EXTSENSORNAME]' in slot
'[EXTSENSORSLOT]' unavailable.
Peripheral device
'[EXTSENSORNAME]' in slot
'[EXTSENSORSLOT]' available.
Peripheral Device Slot > * >
Numeric Sensor > Above upper
critical threshold
Peripheral device
'[EXTSENSORNAME]' in slot
[EXTSENSORSLOT] asserted 'above
upper critical' at [SENSORREADING]
[SENSORREADINGUNIT].
Peripheral device
'[EXTSENSORNAME]' in slot
[EXTSENSORSLOT] deasserted
'above upper critical' at
[SENSORREADING]
[SENSORREADINGUNIT].
Peripheral Device Slot > * >
Numeric Sensor > Above upper
warning threshold
Peripheral device
'[EXTSENSORNAME]' in slot
[EXTSENSORSLOT] asserted 'above
upper warning' at [SENSORREADING]
[SENSORREADINGUNIT].
Peripheral device
'[EXTSENSORNAME]' in slot
[EXTSENSORSLOT] deasserted
'above upper warning' at
[SENSORREADING]
[SENSORREADINGUNIT].
Summary of Contents for Raritan SRC-0100
