LEGRAND Raritan SRC-0100, User Manual

Page: 541 / 698

Chapter 9: Using SCP Commands
529
2. Type the user password when prompted.
3. The system copies the configuration included in the file
"bulk_config.txt" to another SRC, and displays the following
message.
Starting restore operation. The connection will be
closed now.
SCP examples:

Save operation:
scp admin@192.168.87.50:/bulk_config.txt today_config.txt

Copy operation:
scp today_config.txt admin@192.168.87.47:/bulk_restore
Windows PSCP commands:
PSCP in Windows works in a similar way to the SCP.

Save operation:
pscp <user name>@<device ip>:/bulk_config.txt today_config.txt

Copy operation:
pscp today_config.txt <user name>@<device ip>:/bulk_restore
Alternative of bulk configuration via SCP:
Both methods of uploading 'bulk configuration' file or 'raw configuration'
file via SCP can serve the purpose of bulk configuration. The only
difference is that you can configure
device-specific settings with the
upload of raw configuration but not with the 'bulk configuration' file.

Uploading or Downloading Raw Configuration Data (on page 531)
Backup and Restore via SCP
To back up ALL settings of a SRC, including device-specific settings, you
should perform the backup operation instead of the bulk configuration.
You can restore all settings to previous ones after a backup file is
available.
To back up the settings via SCP:
1. Type the following SCP command and press Enter.
scp <user name>@<device ip>:/backup_settings.txt