LEGRAND Raritan SRC-0100, User Manual

Page: 66 / 698

Chapter 4: Connecting External Equipment (Optional)
54
6. After connecting detectors/switches to the terminal module, plug the
terminal module back into the sensor box, and then tighten the
screws at two sides of the terminal module.
To make connections when the terminal module is attached:
You can also connect a detector/switch when the terminal module
remains attached to the sensor box. For detailed information on the
insulation and torque, refer to the above procedure.
1. Strip the insulation of each wire of both detectors/switches, and
insert them to the termination points.
2. Tighten the screws above each termination point to secure wires.