LEGRAND Raritan SRC-0100, User Manual

Page: 377 / 698

Chapter 6: Using the Web Interface
365
When a user scans his/her smart card with the card reader, SRC will
retrieve the card's type and ID and show them in the corresponding Card
Type and Card ID column. If no data is shown in the two columns, it
means the scanned card may not be supported by the card reader.
Tip: You can use a third-party application, such as Power IQ, to retrieve
the card's data from SRC to perform security features like cabinet
access control. Refer to that application's user documentation for more
information.
Listed card readers can be one or both of the following types.
Door handle-integrated card readers:

This type of card reader is integrated in the door handle, which is any
series below:

Emka Agent E

SouthCo H3-EM

Dirak eLine MLR 2x00
Note: Not every SouthCo H3-EM door handle has a card reader
integrated. For example, H3-EM-60-100 requires an external card
reader.

It is connected to SRC via the DX2-DH2C2 module.

The Channel column indicates which door handle port (channel) it is
connected to.

Note that the serial number displayed for this card reader is the
same as DX2-DH2C2's serial number.
Each DX2-PD2C2 module can show two card readers because they
have two ports for connecting two door handles with card readers
integrated.
Standalone USB card readers:

It is directly connected to the USB-A port of SRC.

The Channel column does not show any data.