LEGRAND Raritan SRC-0100, User Manual

Page: 106 / 698

Chapter 5: Introduction to SRC Components
94
Reset Button
The reset button is located inside the small hole labeled RESET near the
display panel.

Pressing this reset button restarts the SRC software.

The SRC can be reset to its factory default values using this button
when a serial connection is available. See
Resetting to Factory
Defaults (on page 583).
Beeper
The SRC includes an internal beeper, which can issue an audible alarm.
Note that the beeper does NOT sound an alarm unless an event rule
involving the internal beeper has been created and turned on the internal
beeper accordingly. See
Event Rules and Actions
(on page 237).
Tip: To remotely check this beeper's state via the web interface, see SRC
(on page 113).