Chapter 8: Using the Command Line Interface
474
<option3> is one of the options:
pascal or psi.
Option
Description
pascal
This option displays the pressure value in Pascals
(Pa).
psi
This option displays the pressure value in psi.
Specifying the SSH Public Key
If the SSH key-based authentication is enabled, specify the SSH public
key for each user profile using the following procedure.
To specify or change the SSH public key for a specific user:
1.
Type the SSH public key command as shown below and press Enter.
config:#
user modify <name> sshPublicKey
2.
The system prompts you to enter the contents of the SSH public key.
Do the following to input the contents:
a.
Open your SSH public key with a text editor.
b.
Copy all contents in the text editor.
c.
Paste the contents into the terminal.
d.
Press Enter.
To remove an existing SSH public key:
1.
Type the same command as shown above.
2.
When the system prompts you to input the contents, press Enter
without typing or pasting anything.
Example
The following procedure illustrates how to change the SSH public key for
the user "assistant."
1.
Verify that you have entered the configuration mode. See
Entering
Configuration Mode
(on page 403).
2.
Type the following command and press Enter.
config:#
user modify assistant sshPublicKey
3.
You are prompted to enter a new SSH public key.
4.
Type the new key and press Enter.
Summary of Contents for Raritan SRC-0100
