Chapter 6: Using the Web Interface
172
(Optional) To view the diagnostic log for EAP authentication:
Click Show EAP Authentication Log. See
Diagnostic Log for
Network Connections
(on page 182).
Common Network Settings
Common Network Settings are OPTIONAL, not required. Therefore, leave
them unchanged if there are no specific local networking requirements.
Field
Description
Cascading mode
Leave it to the default "None" unless you are
establishing a cascading chain.
For more information, refer to:
Cascading Multiple SRC Devices for Sharing
Ethernet Connectivity
(on page 24)
Setting the Cascading Mode
(on page 187)
DNS resolver
preference
Determine which IP address is used when the
DNS resolver returns both IPv4 and IPv6
addresses.
IPv4 address: Use the IPv4 addresses.
IPv6 address: Use the IPv6 addresses.
DNS suffixes
(optional)
Specify a DNS suffix name if needed.
Summary of Contents for Raritan SRC-0100
