LEGRAND Raritan SRC-0100, User Manual

Page: 474 / 698

Chapter 8: Using the Command Line Interface
462
Modifying a Role-Based Access Control Rule
Depending on what to modify in an existing rule, the command syntax
varies.

IPv4 commands
Modify a rule's IPv4 address range:
config:# security roleBasedAccessControl ipv4 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip>
Modify an IPv4 rule's role:
config:# security roleBasedAccessControl ipv4 rule modify <rule_number> role <role>
Modify an IPv4 rule's policy:
config:# security roleBasedAccessControl ipv4 rule modify <rule_number> policy
<policy>
Modify all contents of an existing IPv4 rule:
config:# security roleBasedAccessControl ipv4 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip> role <role> policy <policy>

IPv6 commands
Modify a rule's IPv6 address range:
config:# security roleBasedAccessControl ipv6 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip>
Modify an IPv6 rule's role:
config:# security roleBasedAccessControl ipv6 rule modify <rule_number> role <role>
Modify an IPv6 rule's policy: