LEGRAND Raritan SRC-0100, User Manual

Page: 462 / 698

Chapter 8: Using the Command Line Interface
450
config:# security ipAccessControl ipv6 rule modify <direction> <rule_number> policy
<policy>
Modify all contents of an IPv6 existing rule:
config:# security ipAccessControl ipv6 rule modify <direction> <rule_number> ipMask
<ip_mask> policy <policy>
Variables:

<direction> is one of the options: in or out.
Direction Description
in Inbound traffic.
out Outbound traffic.

<rule_number> is the number of the existing rule that you want to
modify.

<ip_mask> is the combination of the IP address and subnet mask
values (or prefix length), which are separated with a slash. For
example, an IPv4 combination looks like this:
192.168.94.222/24.

<policy> is one of the options: accept, drop or reject.
Option Description
accept Accepts traffic from/to the specified IP
address(es).
drop Discards traffic from/to the specified IP
address(es), without sending any failure
notification to the source or destination host.
reject Discards traffic from/to the specified IP
address(es), and an ICMP message is sent to the
source or destination host for failure notification.
Deleting a Firewall Rule
The following commands remove a specific IPv4 or IPv6 rule from the
list.
IPv4 commands