LEGRAND Raritan SRC-0100, User Manual

Page: 37 / 698

Chapter 3: Initial Installation and Configuration
25

The cascading mode of all devices in the chain must be the same.

In the Bridging mode, the master device can have "only one"
connection to the network. DO NOT connect both Ethernet ports to
the network(s) unless your network has the R/STP protocol enabled.
Note: The Port Forwarding mode does NOT have this restriction. In
this mode, you can enable two wired and one wireless network
connections.

Do NOT connect slave devices to the LAN or WLAN.

(WIFI only) You must use Raritan's USB WIFI wireless LAN adapter
instead of other WIFI adapters for wireless network connection.
Troubleshooting:
When a networking issue occurs, check the cascading connection and/or
software settings of all devices in the chain. See
Cascading
Troubleshooting
(on page 652).
Online Cascading Guide:
For detailed information on the cascading configuration and restrictions,
refer to the
Cascading Guide, which is available from Raritan website's
Support page
(
).