LEGRAND Raritan SRC-0100, User Manual

Page: 194 / 698

Chapter 6: Using the Web Interface
182
Diagnostic Log for Network Connections
SRC provides a diagnostic log for inspecting connection errors that
occurred during the EAP authentication or the wireless network
connection. The information is useful for technical support.
Note that the diagnostic log shows data only after connection errors are
detected.
Each entry in the log consists of:

ID number

Date and time

Description
To view the log:
1. Access the diagnostic log with either method below.

Choose Device Settings > Network > ETH1/ETH2 > Show EAP
Authentication Log. See
Configuring Network Settings
(on page
169).

Choose Device Settings > Network > WIRELESS > Show WLAN
Diagnostic Log.
2. The log is refreshed automatically at a regular interval of five
seconds. To avoid any new events' interruption during data browsing,
you can suspend the automatic update by clicking .

To restore automatic update, click . Those new
events that have not been listed yet due to suspension will be
displayed in the log now.
3. To go to other pages of the log, click the pagination bar at the bottom
of the page.

When there are more than 5 pages and the page numbers listed
does not show the desired one, click to have the bar
show the next or previous five page numbers, if available.
4. If wanted, you can resort the list by clicking the desired column
header. See
Sorting a List
(on page 107).
To clear the diagnostic log:
1. On the top-right corner of the log, click > .
2. Click Clear Log on the confirmation message.