Chapter 6: Using the Web Interface
143
Field
Description
LED Mode
This field is configurable only after the
Operation Mode is set to Manual Override.
Determine how the LED light behaves for this
particular rack unit.
On: The LED stays lit.
Off: The LED stays off.
Slow blinking: The LED blinks slowly.
Fast blinking: The LED blinks quickly.
LED Color
This field is configurable only after the
Operation Mode is set to Manual Override.
Determine what LED color is shown for this
rack unit if the LED is lit.
To expand a blade extension strip:
A blade extension strip, like an asset strip, has multiple tag ports. An
extension strip is marked with a grayer color on the Asset Strip page,
and its tag ports list is collapsed by default.
Note: If you need to temporarily disconnect the blade extension strip
from the asset strip, wait at least 1 second before re-connecting it back,
or the SRC device may not detect it.
1.
Locate the rack unit (tag port) where the blade extension strip is
connected. Click its slot number, whose format is similar to
, where N is the total number of its tag ports.
Summary of Contents for Raritan SRC-0100
