LEGRAND Raritan SRC-0100, User Manual

Page: 322 / 698

Chapter 6: Using the Web Interface
310
Writing or Loading a Lua Script
You can enter or load up to 4 scripts to the SRC.
Tip: If you can no longer enter or load a new script after reaching the
upper limit, you can either delete any existing script or simply
modify/replace an existing script's codes. See
Modifying or Deleting a
Script
(on page 314).
To write or load a Lua script:
1. Choose Device Settings > Lua Scripts > .
2. Type a name for this script. Its length ranges between 1 to 63
characters.
The name must contain the following characters only.

Alphanumeric characters

Underscore (_)

Minus (-)
Note: Spaces are NOT permitted.
3. Determine whether and when to automatically execute the loaded
script.
Checkbox Behavior when selected
Start automatically at
system boot Whenever the SRC reboots, the script is automatically
executed.
Restart after
termination The script is automatically executed each time after 10
seconds since the script execution finishes.
4. (Optional) Determine the arguments that will be executed by default.
a. Click .
b. Type the key and value.
c. Repeat the same steps to enter more arguments as needed.

To remove any existing argument, click adjacent to
it.
Note: The above default arguments will be overridden by new
arguments specified with the "Start with Arguments" command or
with any Lua-script-related event rule. See
Manually Starting or
Stopping a Script (on page 311) or Start or Stop a Lua Script (on
page 271).