LEGRAND Raritan SRC-0100, User Manual

Page: 498 / 698

Chapter 8: Using the Command Line Interface
486

<bind_type> is one of the bind options: anonymouseBind, or
authenticatedBind.
Type Description
anonymousBind
Enable the anonymous Bind.
Bind DN and password are NOT
required.
authenticatedBind
Enable the Bind with authentication.
Bind DN and password are required.

<base_DN> is the base DN for search.

<login_name_att> is the login name attribute.

<user_entry_class> is the User Entry Object Class.
Optional Parameters
You can add one or multiple "optional parameters", such as specifying
the Bind DN or certificate upload, to an LDAP-server-adding command
as illustrated below. If adding multiple optional parameters, you must
add them to the END of the command and separate them with a space.

Example 1 -- Specify an Active Directory Domain's name:
config:# authentication ldap add <host> <port> <ldap_type> <security>
<bind_type> <base_DN> <login_name_att> <user_entry_class>
adDomain <AD_domain>

Example 2 -- Set up the bind DN:
config:# authentication ldap add <host> <port> <ldap_type> <security>
<bind_type> <base_DN> <login_name_att> <user_entry_class>
bindDN
<bind_DN>
"Optional Parameters" table:
Parameters To configure
userSearchSubfilter <filter>
User search subfilter
bindDN <bind_DN>
bind DN

The system will prompt you to enter and
re-confirm the bind password after adding
this parameter to the command.

For details, see Illustrations of Adding
LDAP Servers (on page 486).