LEGRAND Raritan SRC-0100, User Manual

Page: 41 / 698

Chapter 3: Initial Installation and Configuration
29
Extended Cascading with SRC Devices
SRC supports cascading via either Ethernet or USB ports. This is
because they have "two" Ethernet ports.
You can use either Ethernet port on the SRC PDU for cascading.
You must set the cascading mode before establishing the chain. See
Setting the Cascading Mode (on page 187).
Both cascading modes support a maximum of 16 devices in a chain.
When establishing a Port-Forwarding chain, make sure you follow the
guidelines described in the section titled
Restrictions of
Port-Forwarding Connections
(on page 33).
You can mix Ethernet and USB cascading in the SRC PDU chain if
preferred. The following diagram illustrates such a chain.
The distance between two Ethernet-cascaded devices can be up to 100
meters, while the distance between two USB-cascaded devices supports
up to 5 meters only.