Chapter 8: Using the Command Line Interface
451
config:#
security ipAccessControl ipv4 rule delete <direction> <rule_number>
IPv6 commands
config:#
security ipAccessControl ipv6 rule delete <direction> <rule_number>
Variables:
<direction> is one of the options:
in or out.
Direction
Description
in Inbound
traffic.
out Outbound
traffic.
<rule_number> is the number of the existing rule that you want to
remove.
Restricted Service Agreement
The CLI command used to set the Restricted Service Agreement feature
begins with
security restrictedServiceAgreement
,
Enabling or Disabling the Restricted Service Agreement
This command activates or deactivates the Restricted Service
Agreement.
config:#
security restrictedServiceAgreement enabled <option>
Variables:
<option> is one of the options:
true or false.
Option
Description
true
Enables the Restricted Service Agreement
feature.
false
Disables the Restricted Service Agreement
feature.
Summary of Contents for Raritan SRC-0100
