LEGRAND Raritan SRC-0100, User Manual

Page: 192 / 698

Chapter 6: Using the Web Interface
180
Field/setting Description
Click this button to import a certificate file. Then
you can:

Click Show to view the certificate's content.

Click Remove to delete the installed certificate
if it is inappropriate.
Allow expired and
not yet valid
certificates

Select this checkbox to make the
authentication succeed regardless of the
certificate's validity period.

After deselecting this checkbox, the
authentication fails whenever any certificate in
the selected certificate chain is outdated or not
valid yet.
Allow connection if
system clock is
incorrect When this checkbox is deselected, and if the
system time is incorrect, the installed TLS
certificate is considered not valid yet and will
cause the wireless network connection to fail.
When this checkbox is selected, it will make the
wireless network connection successful when the
SRC system time is earlier than the firmware
build before synchronizing with any NTP server.

The incorrect system time issue may occur
when the SRC has once been powered off for a
long time.
IPv4 settings:
Field/setting Description
Enable IPv4 Enable or disable the IPv4 protocol.
IP auto
configuration Select the method to configure IPv4 settings.

DHCP: Auto-configure IPv4 settings via DHCP
servers.

Static: Manually configure the IPv4 settings.
Preferred
hostname Enter the hostname you prefer for IPv4
connectivity

DHCP settings: Optionally specify the preferred hostname, which
must meet the following requirements:

Consists of alphanumeric characters and/or hyphens

Cannot begin or end with a hyphen