LEGRAND Raritan SRC-0100, User Manual, Page: 71 / 698

Chapter 4: Connecting External Equipment (Optional)
59
Connecting Asset Tags to SRC
The following asset tag connection procedure applies to all SRC models.
Note that the maximum cabling distance supported for each connected
asset strip assembly is 10 meters.
To connect a regular asset strip assembly to SRC:
1. Assemble regular asset strips according to your needs. See
Combining Regular Asset Strips (on page 56).
2. Affix the adhesive end of an asset tag to each IT device through the
tag's tape. See
Introduction to Asset Tags
(on page 58).
3. Plug the connector of each asset tag into the corresponding tag port
on the asset strip.
Note: If an IT device occupies more than one rack unit in the rack, it
is suggested to plug the asset tag into the lowest tag port. For
example, if a device occupies the 5th and 6th rack units, plug the
asset tag into the tag port matches the 5th rack unit.
4. Use a standard network patch cable to connect the MASTER asset
strip's RJ-45 connector to a FEATURE port on the SRC.
(A) MASTER asset strip
(B) Asset tags
(C) IT devices