LEGRAND Raritan SRC-0100, User Manual

Page: 77 / 698

Chapter 4: Connecting External Equipment (Optional)
65
5. Repeat Step 3 to connect IT devices to the other composite asset
strips in the chain.
Daisy-Chain Limitations of Composite Asset Strips
There are some limitations when daisy chaining composite asset strips
"AMS-Mx-Z," where x is a number.

The maximum cable length between composite asset strips is 2
meters, but the total cable length cannot exceed 10 meters.

The maximum number of composite asset strips that can be daisy
chained depends on the Raritan product you purchased.

It is NOT supported to hot swap or hot plug any AMS-Mx-Z in a
composite asset strip chain that has been connected to Raritan's
PDU, SRC, or PMC. Therefore, first disconnect the chain from the
device when you need to swap or add any AMS-Mx-Z to the chain.
Raritan devices Maximum strips per chain
EMX2-111,
PX2 PDUs,
BCM1 (NOT BCM2
series)
Up to 4 composite asset strips
are supported.
Smart Rack Controller,
EMX2-888,
PX3 PDUs,
PX3TS transfer
switches
PMC (BCM2 series)
Up to 6 composite asset strips
are supported.
Note: In case you hot swap or hot plug any AMS-Mx-Z in a chain, causing
the FEATURE port of the SRC to malfunction, you can power cycle or
reset the SRC to restore the FEATURE port.