LEGRAND Raritan SRC-0100, User Manual

Page: 215 / 698

Chapter 6: Using the Web Interface
203
3. Now that you have set the SMTP settings, you can test it to ensure it
works properly.
a. Type the recipient's email address in the 'Recipient email
addresses' field. Use a comma to separate multiple email
addresses.
b. Click Send Test Email.
c. Check if the recipient(s) receives the email successfully.
4. Click Save.
Special note for AES ciphers:
The SRC device's TLS-based protocols support AES 128- and 256-bit
ciphers. The exact cipher to use is negotiated between SRC and the client
(such as a web browser), which is impacted by the cipher priority of SRC
and the client's cipher availability/settings.
Tip: To force SRC to use a specific AES cipher, refer to your client's user
documentation for information on configuring AES settings.
Changing SSH Settings
You can enable or disable the SSH access to the command line interface,
change the TCP port, or set a password or public key for login over the
SSH connection.
To change SSH settings:
1. Choose Device Settings > Network Services > SSH.
2. To enable or disable the SSH access, select or deselect the
checkbox.
3. To use a different port, type a port number.
4. Select one of the authentication methods.

Password authentication only: Enables the password-based login
only.

Public key authentication only: Enables the public key-based
login only.

Password and public key authentication: Enables both the
password- and public key-based login. This is the default.
5. Click Save.
If the public key authentication is selected, you must enter a valid SSH
public key for each user profile to log in over the SSH connection. See
Creating Users (on page 156).