LEGRAND Raritan SRC-0100, User Manual

Page: 507 / 698

Chapter 8: Using the Command Line Interface
495
Removing an Existing Radius Server
This command removes an existing Radius server from the server list.
config:# authentication radius delete <server_num>
Variables:

<server_num> is the sequential number of the specified server in the
Radius server list.
Environmental Sensor Configuration Commands
An environmental sensor configuration command begins with
externalsensor. You can configure the name and location parameters of
an individual environmental sensor.
Note: To configure an actuator, see
Actuator Configuration Commands
(on page 504).
Changing the Sensor Name
This command names an environmental sensor.
config:# externalsensor <n> name "<name>"
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the SRC web interface or
using the command "
show externalsensors <n>
" in the CLI. It is
an integer starting at 1.

<name> is a string comprising up to 64 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.
Note: To name an actuator, see Actuator Configuration Commands (on
page 504).