LEGRAND Raritan SRC-0100, User Manual

Page: 284 / 698

Chapter 6: Using the Web Interface
272
b. Type the key and value.
c. Repeat the same steps to enter more arguments as needed.

To remove any existing argument, click adjacent to
it.
Switch LHX/SHX
If Schroff LHX/SHX Support is enabled, the LHX/SHX-related actions will
be available. See
Miscellaneous
(on page 314).
Use this action to switch the LHX/SHX on or off when, for example,
temperature thresholds are reached.
Operation:
1. Choose Device Settings > Event Rules > .
2. Select 'Switch LHX/SHX' from the Action list.
3. In the Operation field, select 'Turn LHX/SHX on' or 'Turn LHX/SHX
off.'
4. In the Available LHX/SHX field, select the LHX/SHX device to be
turned on or off. To select all available LHX/SHX devices, click Select
All.
To remove any LHX/SHX device from the Selected LHX/SHX field,
click that device's . To remove all devices, click Deselect All.
Switch Peripheral Actuator
If you have any actuator connected to the SRC, you can set up the SRC so
it automatically turns on or off the system controlled by the actuator
when a specific event occurs.
Note: For information on connecting actuators, see
DX2 Sensor
Packages
(on page 38).
Operation:
1. Choose Device Settings > Event Rules > .
2. Select 'Switch peripheral actuator' from the Action list.
3. In the Operation field, select an operation for the selected
actuator(s).

Turn on: Turns on the selected actuator(s).

Turn off: Turns off the selected actuator(s).