LEGRAND Raritan SRC-0100, User Manual

Page: 556 / 698

Appendix B: Configuration or Firmware Upgrade with a USB Drive
544
logfile

Specify the name of a text file where the SRC will append the log
messages when interpreting the USB drive contents.

If the specified file does not exist in the USB drive, it will be
automatically created.

If this option is not set, no log messages are recorded. The
disadvantage is that no feedback is available if the SRC detects a
problem with the USB drive contents.
firmware

Specify the name of a firmware binary file used to upgrade your SRC.

The specified firmware file must be compatible with your SRC and
have an official Raritan signature.

If the specified firmware file is the same as the current firmware
version of your SRC, no firmware upgrade is performed.

The default is to NOT permit any firmware downgrade via USB drive
on Raritan power products with "USB-A" port(s). To do this, the
parameter "allow_downgrade" must be present and properly set in
the
fwupdate.cfg file.
config

Specify the name of the configuration file containing device settings.

The suggested filename is
config.txt. See config.txt
(on page 546).
device_list

Specify the name of the configuration file listing all SRC devices to
configure and their device-specific settings.

This file is required if any macros are used in the device
configuration file "config.txt."

The suggested filename is
devices.csv. See devices.csv
(on page
549).
match

Specify a match condition for identifying a line or one SRC device in
the device configuration file "devices.csv."
The option's value comprises one word and one number as explained
below:

The word prior to the colon is an identification property, which is
either
serial
for serial number or
mac
for MAC address.

The number following the colon indicates a column in the
devices.csv file.