LEGRAND Raritan SRC-0100, User Manual, Page: 449 / 698

Chapter 8: Using the Command Line Interface
437
Enabling or Disabling SNMP v1/v2c
This command enables or disables the SNMP v1/v2c protocol.
config:# network services snmp v1/v2c <option>
Variables:

<option> is one of the options: enable or disable.
Option Description
enable The SNMP v1/v2c protocol is enabled.
disable The SNMP v1/v2c protocol is disabled.
Enabling or Disabling SNMP v3
This command enables or disables the SNMP v3 protocol.
config:# network services snmp v3 <option>
Variables:

<option> is one of the options: enable or disable.
Option Description
enable The SNMP v3 protocol is enabled.
disable The SNMP v3 protocol is disabled.
Setting the SNMP Read Community
This command sets the SNMP read-only community string.
config:# network services snmp readCommunity <string>
Variables:

<string> is a string comprising 4 to 64 ASCII printable characters.

The string CANNOT include spaces.