LEGRAND Raritan SRC-0100, User Manual

Page: 92 / 698

Chapter 5: Introduction to SRC Components
80
Number Description
The time the alarm occurred.
If the alarm occurred at least two times, then more information is shown.

Number of alarms

The first occurrence time

The last occurrence time
Alerted sensor names.
Sensor readings and/or states.
A numeric sensor shows both the reading and state. A state sensor or
actuator shows the state only.
Available states are listed below. For further information, see
Sensor/Actuator States (on page 125).

Alarmed

Lower Critical = below lower critical

Lower Warning = below lower warning

Upper Warning = above upper warning

Upper Critical = above upper critical

Open (only available for Raritan PDUs with overcurrent protectors)
The 'Details' command appears for alarms only.

If your Alert List comprises alerted sensors only, then 'Details' is not
shown.
3. Press or to view additional pages. When there are
multiple pages, page numbers appear in the top-right corner of the
display.
SRC
The "SRC" menu command shows the internal beeper state.
Tip: The internal beeper state information is also available in the SRC
web interface. See
SRC
(on page 113).
To view or configure SRC information:
1. Press or to select "SRC" in the Main Menu, and press
.
2. The internal beeper state is shown: Active or Off.

In the Active state, the reason of turning on the beeper is
indicated, and the top/bottom bars turn red.