LEGRAND Raritan SRC-0100, User Manual

Page: 137 / 698

Chapter 6: Using the Web Interface
125

They do
not have an ID number.

They show the "unmanaged" state.
Sensor/Actuator States
An environmental sensor or actuator shows its real-time state after
being managed.
Available sensor states depend on the sensor type -- numeric or state
sensors. For example, a contact closure sensor is a state sensor so it
switches between three states only --
unavailable, alarmed and normal.
Sensors will be highlighted in yellow or red when they enter abnormal
states. See
Yellow- or Red-Highlighted Sensors
(on page 123).
An actuator's state is marked in red when it is turned on.
Managed sensor states:
In the following table, "R" represents any numeric sensor's reading. The
symbol <= means "smaller than" or "equal to."
State Description
normal

For numeric sensors, it means the
readings are within the normal range.

For state sensors, it means they enter the
normal state.
below lower critical "R" < Lower Critical threshold
below lower warning Lower Critical threshold <= "R" < Lower
Warning threshold
above upper warning Upper Warning threshold < "R" <= Upper
Critical threshold
above upper critical Upper Critical threshold < "R"
alarmed The state sensor enters the abnormal state.
unavailable

Communication with the managed sensor
is lost.
-- OR --

DX2 and DX sensor packages are
upgrading their sensor firmware.