Chapter 6: Using the Web Interface
266
Send SMS Message
You can configure SMS messages to be sent when an event occurs and
can customize the message.
Only the 7-bit ASCII charset is supported for SMS messages. Messages
consist of a combination of free text and SRC placeholders. The
placeholders represent information which is pulled from the SRC and
inserted into the message.
A supported modem, such as the Cinterion
®
GSM MC52i modem, must be
plugged into the SRC in order to send SMS messages. See
Connecting a
GSM Modem
(on page 67).
Note: The SRC cannot receive SMS messages.
For example:
[USERNAME] logged into the device on [TIMESTAMP]
translates to
Mary logged into the device on 2012-January-30 21:00
For a list and definition of available variables, see
Placeholders for
Custom Messages
(on page 283).
Operation:
1.
Choose Device Settings > Event Rules >
.
2.
Select 'Send SMS message' from the Action list.
3.
In the 'Recipient phone number' field, specify the phone number of
the recipient.
4.
Select the 'Use custom log message' checkbox, and then create a
custom message in the provided text box.
Summary of Contents for Raritan SRC-0100
