Chapter 6: Using the Web Interface
361
Section
Description
Timeout
Specify how long the door handle lock can remain
open after someone opens the door handle via a
smart card or via remote control using the
software. When the timeout expires, the door
handle lock will be automatically closed. Default is
600 seconds (that is, 10 minutes).
Door sensor
polarity
Determine which of the following status is considered
normal for doors (that is, contact closure terminals of
DX2-DH2C2).
Normally closed: When the contact closure
terminals are closed, the door is considered
"closed". This is the default.
Normally open: When the contact closure
terminals are open, the door is considered
"closed".
4.
Click Save.
Summary of Contents for Raritan SRC-0100
