CALIBRATION PROCEDURE
PXIe-4310
8-channel, 16-bit, 400 kS/s/ch, Ch-Ch Isolated Analog Input Module
This document contains the verification and adjustment procedures for the PXIe-4310 module.
Note
To maintain forced air cooling in the PXI Express system, refer to the
Maintain Forced-Air Cooling Note to Users
.
Contents
Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 2
PXIe-4310 Verification and Adjustment.................................................................................. 3
Self-Calibration ........................................................................................................ 5
Checking Device Temperature Changes .................................................................. 6
Accuracy Verification....................................................................................................... 6
Adjustment........................................................................................................................ 8
Reverification ................................................................................................................... 9
Software
Calibrating the PXIe-4310 requires the installation of NI-DAQmx on the calibration system.
Driver support for calibrating the PXIe-4310 was first available in NI-DAQmx 17.1. For the list
of devices supported by a specific release, refer to the
NI-DAQmx Readme
, available on the
version-specific download page or installation media.
You can download NI-DAQmx from
. NI-DAQmx supports LabVIEW,
LabWindows™/CVI™, C/C++, C#, and Visual Basic .NET. When you install NI-DAQmx, you
only need to install support for the application software that you intend to use.
