LEGRAND Raritan SRC-0100, User Manual

Page: 523 / 698

Chapter 8: Using the Command Line Interface
511
Specifying the Rack Unit Numbering Mode
This command syntax specifies the numbering mode of rack units on the
asset strips connected to the SRC device. The numbering mode changes
the rack unit numbers.
config:# assetStrip <n> rackUnitNumberingMode <mode>
Variables:

<n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the SRC device with only one
FEATURE port, the number is always 1.

<mode> is one of the numbering modes: topDown or bottomUp.
Mode Description
topDown The rack units are numbered in the ascending
order from the highest to the lowest rack unit.
bottomUp The rack units are numbered in the descending
order from the highest to the lowest rack unit.
Specifying the Rack Unit Numbering Offset
This command syntax specifies the starting number of rack units on the
asset strips connected to the SRC device.
config:# assetStrip <n> rackUnitNumberingOffset <number>
Variables:

<n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the SRC device with only one
FEATURE port, the number is always 1.

<number> is a starting number for numbering rack units on the
connected asset strip. This value is an integer number.