LEGRAND Raritan SRC-0100, User Manual

Page: 282 / 698

Chapter 6: Using the Web Interface
270
Tip: An SNMP v2c notification action permits only a maximum of three
SNMP destinations. To assign more than three SNMP destinations to a
specific rule, first create several SNMP v2c notification actions, each of
which contains completely different SNMP destinations, and then add all
of these SNMP v2c notification actions to the same rule.
To send SNMP v3 notifications:
1. In the 'Notification type' field, select 'SNMPv3 trap' or 'SNMPv3
inform.'
2. For SNMP TRAPs, the engine ID is prepopulated.
3. For SNMP INFORM communications, leave the resend settings at
their default or do the following:
a. In the Timeout field, specify the interval of time, in seconds, after
which a new inform communication is resent if the first is not
received. For example, resend a new inform communication
once every 3 seconds.
b. In the 'Number of retries' field, specify the number of times you
want to re-send the inform communication if it fails. For
example, inform communications are re-sent up to 5 times when
the initial communication fails.
4. For both SNMP TRAPS and INFORMS, enter the following as needed
and then click OK to apply the settings:
a. Host name
b. Port number
c. User ID for accessing the host -- make sure the User ID has the
SNMPv3 permission.
d. Select the host security level