LEGRAND Raritan SRC-0100, User Manual

Page: 509 / 698

Chapter 8: Using the Command Line Interface
497
Setting the Y Coordinate
This command specifies the Y coordinate of an environmental sensor.
config:# externalsensor <n> ylabel "<coordinate>"
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the SRC web interface or
using the command "
show externalsensors <n>
" in the CLI. It is
an integer starting at 1.

<coordinate> is a string comprising up to 24 ASCII printable
characters, and it must be enclosed in quotes.
Setting the Z Coordinate
This command specifies the Z coordinate of an environmental sensor.
config:# externalsensor <n> zlabel "<coordinate>"
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the SRC web interface or
using the command "
show externalsensors <n>
" in the CLI. It is
an integer starting at 1.

Depending on the Z coordinate format you set, there are two types of
values for the <coordinate> variable:
Type Description
Free form <coordinate> is a string comprising up to 24 ASCII
printable characters, and it must be enclosed in
quotes.
Rack units <coordinate> is an integer number in rack units.
Note: To specify the Z coordinate using the rack units, see
Setting the Z
Coordinate Format for Environmental Sensors
(on page 406).