LEGRAND Raritan SRC-0100, User Manual

Page: 286 / 698

Chapter 6: Using the Web Interface
274
Transport
protocols Next steps
TCP+TLS
A TLS certificate is required. Do the following:
a. Type an appropriate port number in the 'TCP port' field. Default is 6514.
b. In the 'CA certificate' field, click to select a TLS certificate. After
importing the certificate, you may:

Click Show to view its contents.

Click Remove to delete it if it is inappropriate.
c. Determine whether to select the 'Allow expired and not yet valid certificates' checkbox.

To always send the event message to the specified syslog server as long as a TLS
certificate is available, select this checkbox.

To prevent the event message from being sent to the specified syslog server when
any TLS certificate in the selected certificate chain is outdated or not valid yet,
deselect this checkbox.
Note: If the required certificate file is a chain of certificates, and you are
not sure about the requirements of a certificate chain, see
TLS
Certificate Chain
(on page 665).
Scheduling an Action
An action can be regularly performed at a preset time interval instead of
being triggered by a specific event. For example, you can make the SRC
report the reading or state of a specific sensor regularly by scheduling
the "Send sensor report" action.
When scheduling an action, make sure you have a minimum of 1-minute
buffer between this action's creation and first execution time. Otherwise,
the scheduled action will NOT be performed at the specified time when
the buffer time is too short. For example, if you want an action to be
performed at 11:00 am, you should finish scheduling it at 10:59 am or
earlier.
If the needed action is not available yet, create it first. See Available
Actions (on page 253).
Operation:
1. Choose Device Settings > Event Rules >
.
2. To select any action(s), select them one by one from the 'Available
actions' list.