LEGRAND Raritan SRC-0100, User Manual

Page: 96 / 698

Chapter 5: Introduction to SRC Components
84
Number Description
The following information is listed.

Serial number

Chain position, which involves the following information:

Port <N>: <N> is the number of the sensor port where this sensor or
actuator is connected. This number is always 1 for SRC.

Chain Pos. <n>: <n> is the sensor or actuator's position in a sensor
daisy chain.
Note: Only Raritan's DX, DX2, DPX2 and DPX3 series provide the chain
position information.

If this sensor or actuator is on a sensor package with multiple channels,
such as DX2-DH2C2, its channel number is indicated as "Channel x",
where x is a number.
Depending on the sensor type, any of the following information is displayed:

State of a state sensor:
Normal, Alarmed, Open or Closed.

State of an actuator:
On or Off.

Reading of a numeric sensor.
X, Y, and Z coordinates which you specify for this sensor or actuator. See
Individual Sensor/Actuator Pages
(on page 131).
To switch on or off an actuator:
1. Follow the above steps 1 to 3 to select an actuator.