LEGRAND Raritan SRC-0100, User Manual

Page: 185 / 698

Chapter 6: Using the Web Interface
173
Field Description
First/Second/Third
DNS server Manually specify static DNS server(s).

If any static DNS server is specified in these
fields, it will override the DHCP-assigned DNS
server.

If DHCP (or Automatic) is selected for
IPv4/IPv6 settings, and there are NO static
DNS servers specified, the SRC will use
DHCP-assigned DNS servers.
IPv4/IPv6 routes You need to configure these settings only when
your local network contains two subnets, and you
want SRC to communicate with the other subnet.
If so, make sure IP forwarding has been enabled
in your network, and then you can click 'Add
Route' to add static routes.
See
Static Route Examples
(on page 183).
Ethernet Interface Settings
By default both ETH1 and ETH2 interfaces on SRC are enabled.
Enable Interface:
Make sure the Ethernet interface is enabled, or all networking through
this interface fails. This setting is available in the ETH1/ETH2 section, but
not available in the BRIDGE section.
Other Ethernet settings:
Field Description
Speed Select a LAN speed.

Auto: System determines the optimum LAN
speed through auto-negotiation.

10 MBit/s: Speed is always 10 Mbps.

100 MBit/s: Speed is always 100 Mbps.

1 GBit/s: Speed is always 1 Gbps (1000 Mbps).
Duplex Select a duplex mode.

Auto: The SRC selects the optimum