LEGRAND Raritan SRC-0100, User Manual

Page: 398 / 698

Chapter 8: Using the Command Line Interface
386
SRC Configuration
This command shows the SRC configuration, such as the device name,
firmware version, model type and upper limit of active powered dry
contact actuators.
# show src
To show detailed information, add the parameter "details" to the end of
the command.
# show src details
Date and Time Settings
This command shows the current date and time settings on the SRC.
# show time
To show detailed information, add the parameter "details" to the end of
the command.
# show time details
Default Measurement Units
This command shows the default measurement units applied to the SRC
web and CLI interfaces across all users, especially those users
authenticated through remote authentication servers.
# show user defaultPreferences
Note: If a user has set his/her own preferred measurement units or the
administrator has changed any user's preferred units, the web and CLI
interfaces show the preferred measurement units for that user instead
of the default ones. See
Existing User Profiles
(on page 393) for the
preferred measurement units for a specific user.