LEGRAND Raritan SRC-0100, User Manual

Page: 444 / 698

Chapter 8: Using the Command Line Interface
432
If Port Forwarding mode is enabled, you must configure two
more settings to finish the configuration:
On ALL cascaded devices, you must configure the 'role' setting one by
one.
config:# network portForwarding role <option2>
On the master device, you must configure the 'downstream interface'
setting.
config:# network portForwarding
masterDownstreamInterface <option3>
Variables:

<option2> is one of the following cascading roles:
Role Description
master The device is a master device.
slave The device is a slave device.

<option3> is one of the following options:
Option Description
ETH1/ETH2 ETH1/ETH2 port is the port where the 1st
slave device is connected.
Usb USB port is the port where the 1st slave
device is connected.
Setting Network Service Parameters
A network service command begins with
network services.