Chapter 8: Using the Command Line Interface
471
config:#
user modify <name> privacyPassPhrase
After performing the above command, SRC prompts you to enter the
privacy passphrase.
Determine the authentication protocol:
config:#
user modify <name> authenticationProtocol <option5>
Determine the privacy protocol:
config:#
user modify <name> privacyProtocol <option6>
Variables:
<name> is the name of the user whose settings you want to change.
<option1> is one of the options:
enable or disable.
Option
Description
enable
Enables the SNMP v3 access permission for the
specified user.
disable
Disables the SNMP v3 access permission for the
specified user.
<option2> is one of the options:
noAuthNoPriv, authNoPriv or
authPriv.
Option
Description
noAuthNoPriv
No authentication and no privacy.
authNoPriv
Authentication and no privacy.
authPriv
Authentication and privacy.
<option3> is one of the options:
true or false.
Option
Description
true Authentication
passphrase is identical to the
password.
Summary of Contents for Raritan SRC-0100
