LEGRAND Raritan SRC-0100, User Manual

Page: 266 / 698

Chapter 6: Using the Web Interface
254
Action Function
Alarm Requires the user to acknowledge the alert
after it is generated. If needed, you can have
the alert notifications regularly generated until
a person takes the acknowledgment action.
See
Alarm (on page 255).
Execute an action
group Creates a group of actions comprising existing
actions. See
Action Group
(on page 257).
External beeper Enables or disables the connected external
beeper, or causes it to enter an alarm cycle.
See
External Beeper (on page 257).
Internal beeper Turns on or off the internal beeper. See
Internal Beeper
(on page 258).
Log event message Records the selected events in the internal log.
See
Log an Event Message (on page 258).
Push out sensor
readings Sends internal sensor log, environmental
sensor log or asset management strip data to a
remote server using HTTP POST requests. See
Push Out Sensor Readings
(on page 259).
Record snapshots to
webcam storage Makes a connected webcam start or stop
taking snapshots. See
Record Snapshots to
Webcam Storage
(on page 259).
Request LHX/SHX
maximum cooling Applies the maximum cooling to the LHX/SHX
device. See
Request LHX/SHX Maximum
Cooling (on page 261).
This option is available only when the Schroff
LHX/SHX support has been enabled.
Send email Emails a textual message. See Send Email (on
page 262).
Send sensor report Reports the readings or status of the selected
sensors, including internal or external
sensors. See
Send Sensor Report (on page
264).
Send SMS message Sends a message to a mobile phone. See
Send
SMS Message
(on page 266).
Send snapshots via
email Emails the snapshots captured by a connected
Logitech
®
webcam (if available). See Send
Snapshots via Email (on page 267).