LEGRAND Raritan SRC-0100, User Manual

Page: 44 / 698

Chapter 3: Initial Installation and Configuration
32

Bridging mode: Each cascaded device has its own network
settings.
For example, you can have some devices use DHCP-assigned IP
addresses and the others use static IP addresses.

Port Forwarding mode: Only the master device's network
settings should be configured.
Enable R/STP if a cascade loop is preferred:

You can "loop" a cascading chain to create network communication
redundancy (Bridging mode only), but only when your network
supports R/STP protocol.
Make sure that your network has R/STP enabled if using a cascade
loop (Bridging mode)
or else network loops may occur.