Chapter 6: Using the Web Interface
96
If the link-local addressing has been enabled, you can type
pdu.local instead of an IP address. See
APIPA and Link-Local
Addressing
(on page 6).
Tip: You can also enter the desired page's URL so that you can
immediately go to that page after login. See
Quick Access to a
Specific Page
(on page 106).
2.
If any security alert message appears, accept it.
3.
The login screen displays. Type your user name and password. User
credentials are case sensitive.
4.
(Optional) If a security agreement is displayed, accept it. Otherwise,
you cannot log in.
Note: To configure the security agreement, see
Enabling the
Restricted Service Agreement
(on page 231).
5.
Click Login or press Enter. The web interface of SRC opens.
Summary of Contents for Raritan SRC-0100
