LEGRAND Raritan SRC-0100, User Manual

Page: 437 / 698

Chapter 8: Using the Command Line Interface
425
config:#
Removing the Uploaded Certificate or Private Key
The procedures of removing an existing client certificate, client private
key or CA certificate in CLI are similar.
This section illustrates such a procedure for the Ethernet interface
"ETH1."
To remove a certificate or private key for ETH1:
1. Make sure you have entered the configuration mode. See Entering
Configuration Mode (on page 403).
2. Type the appropriate command, depending on which file you want to
remove, and press Enter.

Client certificate:
config:# network ethernet eth1 eapClientCertificate

Client private key:
config:# network ethernet eth1 eapClientPrivateKey

CA certificate:
config:# network ethernet eth1 eapCACertificate
3. The system prompts you to enter the contents of the chosen
certificate or private key.
4. Press Enter without typing any data.
5. Verify whether the system shows the following command prompt,
indicating the existing certificate or private key has been removed.
config:#