Chapter 4: Connecting External Equipment (Optional)
51
No.
Component
Function
Two door handle
ports
Ports
(on page 47).
Connection procedure:
1.
First turn the SRC upside down.
2.
Connect contact closure sensors to the terminals. See
Connecting
Detectors/Switches to Contact Closure Terminals
(on page 51).
Connecting Detectors/Switches to Contact Closure Terminals
No matter it is DX2-DH2C2 or the SRC device with onboard door handle
ports, the location of contact closure terminals are always located
between the two door handle ports as illustrated below.
DX2-DH2C2 comprises two parts: sensor box and terminal module. The
terminal module is detachable so it is convenient to connect/disconnect
discrete detectors/switches. SRC with onboard door handle ports also
have this terminal module.
Summary of Contents for Raritan SRC-0100
