The TCP Smart Remote is a Bluetooth Signal Mesh device that can be used to control any TCP SmartStuff
device that is on its Mesh network. Functions such as on,off dimming, and group control can be done through
the Smart Remote instead of using the TCP Smart App.
325 Campus Dr. | Aurora, Ohio 44202 | P: 800-324-1496 | tcpi.com
TCP
®
• Operating Voltage .........................2 AAA batteries (not included)
• Network Protocol .....................................Bluetooth Signal Mesh
• Wireless Transmit & Receive Frequency .......................... 2.4GHz
• Communication Range ................................................ 150 feet
Specifications:
SmartStuff
Remote
Item Number: SMREMOTE
Product Specifications
RECOGNIZED
COMPONENT
1
2
3
4
On
Off
Increase Brightness
Increase CCT
Reduce Brightness
Group 4 On
Group 4 Off
Group 3 On
Group 3 Off
Status Light
Reduce CCT
Group Select
Group 1 On
Group 1 Off
Group 2 On
Group 2 Off
4.32"
4.32
"
2.0"
2.0"
.875"
2.25"
.78"
ON :
Turns on all TCP SmartStuff devices connected to the APP.
OFF :
Turns off all TCP SmartStuff devices connected to the APP.
Increase Brightness:
Increases the brightness of the TCP SmartStuff
devices on a network or an individual group.
Decrease Brightness:
Decreases the brightness of the TCP SmartStuff
devices on a network or an individual group.
Increase CCT*:
Increases the color temperature of the TCP SmartStuff
devices on a network or an individual group.
Decrease CCT*:
Decreases the color temperature of the TCP SmartStuff
devices on a network or an individual group.
*
TCP SmartStuff devices must be capable of changing its color temperature for the buttons to work
Group Buttons Group (1, 2, 3, 4)
Group (1, 2, 3, 4) On:
Turns on all TCP SmartStuff devices connected to the APP.
Group (1, 2, 3, 4) Off:
Turns off all TCP SmartStuff devices connected to the APP.
Group (1, 2, 3, 4) Select:
Selects the corresponding group.
Switching Between Groups
Pressing on Group On, Group Off, or Group Select buttons will enable the Smart
Remote to control the corresponding group. Pressing the CCT or Brightness buttons
will affect the TCP SmartStuff devices in that group only. To change the Smart
Remote to control all the SmartStuff devices, press either ON or OFF. Setting up the
Groups must be done through the TCP Smart Stuff App.
HARDWARE NEEDED
• Electric Drill
• Philips Screw (size needed)
• Drywall Anchor (size needed)
• Ruler
• Pencil
1. Remove the Mounting Base from the Smart Remote.
2. Choose desired location of the Mounting Base.
3. Use a pencil to place a mark on the wall where each
Drywall Anchor will go.
4. Drill holes.
5. Place Drywall Anchor in wall.
6. Place Mounting Anchor on wall and screw in.
Mounting the Smart Remote to a Wall:
Download TCP SmartStuff App:
Android iOS
The TCP SmartStuff App is used to configure the Bluetooth Signal Mesh and TCP SmartStuff devices. Download the TCP
SmartStuff App from the following options:
• Download the SmartStuff App from the Apple App Store or Google Play Store
• Use the QR Codes here:
Instructions for configuring TCP SmartStuff App and SmartStuff devices are at www.tcpi.com/smartstuff/
