LEGRAND Raritan SRC-0100, User Manual

Page: 433 / 698

Chapter 8: Using the Command Line Interface
421
config:# network ethernet <ETH> eapInnerAuthentication <inner_auth>
Set the EAP identity:
config:# network ethernet <ETH> eapIdentity <identity>
Set the EAP password:
config:# network ethernet <ETH> eapPassword
After performing the above command, the SRC prompts you to enter the
password. Then type the password and press Enter.
Provide a client certificate for authentication set to "EAP + TLS"
or "EAP + PEAP + TLS":
config:# network ethernet <ETH> eapClientCertificate
After performing any certificate or private key commands, including
commands for the client certificate, client private key, and CA certificate,
the system prompts you to enter the contents of the wanted certificate or
key. For an example with detailed procedure, see
EAP CA Certificate
Example (on page 422).
Provide a client private key for authentication set to "EAP + TLS"
or "EAP + PEAP + TLS":
config:# network ethernet <ETH> eapClientPrivateKey
Provide a CA TLS certificate for EAP:
config:# network ethernet <ETH> eapCACertificate
Eable or disable verification of the TLS certificate chain:
config:# network ethernet <ETH> enableCertVerification <option1>
Allow expired and not yet valid TLS certificates:
config:# network ethernet <ETH> allowOffTimeRangeCerts <option2>
Allow network connection with incorrect system time: