LEGRAND Raritan SRC-0100, User Manual

Page: 456 / 698

Chapter 8: Using the Command Line Interface
444
2. The system shows a list of time zones. Type the index number of the
desired time zone and press Enter.
3. Type
apply
for the selected time zone to take effect.
Setting the Automatic Daylight Savings Time
This command determines whether the daylight saving time is applied to
the time settings.
config:# time autoDST <option>
Variables:

<option> is one of the options:
enable or disable.
Mode Description
enable Daylight savings time is enabled.
disable Daylight savings time is disabled.
Examples
This section illustrates several time configuration examples.
Example 1 - Time Setup Method
The following command sets the date and time settings by using the NTP
servers.
config:# time method ntp
Example 2 - Primary NTP Server
The following command sets the primary time server to 192.168.80.66.
config:# time ntp firstServer 192.168.80.66